Installation Method Of Water Tap

First prepare the installation tools, check whether the supporting parts are complete before installation, common faucet spare parts are: hoses, rubber gaskets, showers, water removal, crutches, decorative caps, etc.
1. Installation of single-hole basin faucet
When buying a single-handle basin faucet, you should pay attention to the diameter of the water outlet, most of the market belongs to the hard pipe inlet water, so you should pay attention to the height of the upper water outlet, 35 minutes down from the basin is the most suitable. When installing, be sure to choose a special angle valve, and the angle valve must be fixed with the hot and cold water pipes of the wall water. When you find that there is a distance between the angle valve and the water pipe on the faucet, go and buy a special extension pipe to connect. Remember, be sure not to use other water pipes to connect, because if the water pressure is high, it is easy to fall off, leak, and cause you losses. If the inlet pipe is too long and exceeds the outlet pipe, the part can be cut off according to your needs, and if the angle is not suitable, it can be moderately bent to the position you need as needed. Remember: Do not bend hard to 90 degrees or greater than 90 degrees. When installing the basin to remove water, do not forget to buy a small connection (faucet short) of the faucet. Before you install, don't forget to rinse the water pipes buried in the wall beforehand.
2. Installation of shower and bathtub faucets (hanging on the wall).
When you buy a shower, bathtub, wall faucet, you can choose the right height to bury the pipe. The spacing between hot and cold water pipes must reach 15 cm. Don't forget to rinse the water pipes before installation to avoid water quality and damage to the faucet.
Concealed shower and bathtub faucet: After purchasing a concealed faucet, the valve core of the faucet is generally embedded in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the spool will not be able to be pre-embedded. The plastic protective cover of the valve core should not be easily removed during embedding to avoid damage to the valve core by cement and other miscellaneous tasks during embedding. In addition, when embedding the spool, you should also pay attention to the direction of the spool up and down, left and right, so as to avoid the wrong burial of the spool. The size of the wall-mounted faucet is offset when embedded in the inlet pipe, and the adjustable cane can be used for calibration.

3. Installation of thermostatic faucet
Before installing the thermostatic faucet, please check whether the water pipe is hot left and cold right, and remember not to install the hot and cold water pipe incorrectly, so as not to prevent the faucet from working normally. Gas and solar water heaters cannot use thermostatic faucets because the water pressure is too low. To install thermostatic faucets, please do not forget to install hot and cold water filters.
4. Installation of single-hole kitchen faucets
It is required to be stable, because the kitchen faucet is used more frequently, and it is easy to loosen when it is moved around, so the lock nut must be tightened. There are some faucets on the market to fix the solenoid enlarged nut, this stability effect is very good, if it can solve the problem of water lifting, it will be a popular trend in the future.
Scope of application
Suitable for star hotels, hotels, public places, hospitals, homes, etc., it is your ideal choice for pursuing noble and elegant life!
Water pressure environment
For daily use, the water pressure from tap water is generally 3-5 kg, which is equivalent to 0.3-0.5Mpa. If the pressure exceeds 6 kg, it belongs to high water pressure, and the human body feels uncomfortable when rinsing. If the pressure is less than 3 kg, the water pressure can be considered low.