Why is the high-temperature effluent of the instantaneous water dispenser not stable enough?

1. Insufficient water pressure: due to the high temperature, the water pressure is too large, which will lead to unstable water output.

2. Filter blockage: If it is a ready-to-heat direct drinking machine, there will be a filter device inside, if the filter is not cleaned and replaced for a long time and causes blockage, it will lead to unstable water flow. In this case, it is recommended to clean or replace the filter unit.

3. Heating tube failure: If the heating tube fails, it may lead to insufficient heating, water temperature cannot reach the set temperature or the water flow is unstable. In this case, it is necessary to check whether the heating pipe is normal in time, and if it fails, it needs to be repaired or replaced in time.

4. Too many impurities such as bacteria and scale inside the water dispenser: If the instant hot water dispenser is not cleaned in time after long-term use, impurities such as bacteria and scale will accumulate inside, which will not only affect the normal heating of the heater, but also may cause the water machine pipeline to be blocked, which will lead to unstable water flow. When encountering this situation, it is necessary to clean and maintain the instant hot water dispenser in time to ensure that the water machine pipeline is smooth and the heater is operating normally. It should be noted that most instant hot water dispensers need to be left to stand for a certain period of time after cleaning or moving, so that heaters, filters and other components can fully operate normally.